Edge and corner tiles surround the impact protection surface and reduce the risk of tripping when entering the impact protection area due to their beveled edges, certified according to DIN EN 1177.

Features

Edge and corner profiles can be adhesively bonded in a form-fitting and force-fitting manner to an existing, firm substrate on a cleaned, dry, and smooth surface. The joints of the edge and corner plates are glued or sealed together. We recommend using a one-component PUR adhesive.

The substrate must be frost-resistant and level. The installation of the panels can be carried out directly on a bonded base. An asphalt or lean concrete bed is suitable. For already existing paved surfaces (e.g., concrete, asphalt), unevenness must be levelled with an appropriate levelling layer. To ensure water drainage, it is important that the base has a slope and is water-permeable.
For waterproof substrates, ensure there is a slope of approximately 2% and a drainage option for the water.
Slight colour differences and fading are inherent to the material.