Kübler Sport® Handball Goal BASIC, Aluminium strips black/white

The handball goal has the gameplay according to international regulations. Posts and slats are made of aluminum special profile 80 x 80 mm, with a powder-coated surface. A steel reinforcement angle, additionally placed on the back of the gate frame, gives the goal frame a good stability. The net hangers are made of strong steel tube, which gives the gate a unique stand. The net is suspended freely between the nettings. Plastic mesh hooks for easy assembly are included in delivery.

DIN EN 749 stipulates that the gates must be secured against displacement and tilting as well as a force of 950 N acting horizontally on the transverse plate. If the gates are used without an appropriate ground fastening and therefore a damage should occur, the owner is liable. With us, you will find the appropriate equipment, such as floor slabs and safety screws, in order to ensure a safeguarding of the handlebars.

- Goal size 3 x 2 m

- Total depth: 125 cm

- According to international regulations

- Aluminum profile (post / battens profile) 80 x 80 mm

- Surface powder coated

- Good stability due to steel reinforcement angle

- Stainless steel mesh straps

- Mesh brackets can be mounted rigid or foldable

Our recommendations for these indoor handball goals (goalie top 80 cm and bottom 100 cm) are the following:

- linen thickness 4mm, mesh width 100 mm made of polypropylene, in green (H1412) or white (H1415)

- Linen thickness 5mm, mesh width 100 mm of polypropylene with upper and lower tensioning line, in green (H1447) and white (H1448)